Q-Obstruction Light Low Intensity 10 cd

• ICAO annex 14, CAP437, CAP168

Certificates

Technical details

Datasheet, Manuals and Drawings

Details

The Q-Obstruction Light Low Intensity 10 cd is a ICAO & CAP437 compliance Obstruction light for all facilities. The Obstruction Light is available in the configurations 100-240 VAC and 24 VDC.

Omnidirectional low intensity steady red obstruction lights conforming to the specifications for low intensity obstacle lights having a minimum intensity of 10 candelas for angles of elevation between 0 degrees and 10 degrees should be fitted at suitable locations to provide the helicopter pilot with visual information on the proximity and height of objects which are higher than the landing area and which are close to it or to the LOS boundary. This should apply, in particular, to all crane booms on the installation.

Photometrics: Intensity: 10 cd Operation Mode: Steady-burning Horizontal Beam Coverage: Omni-directional Vertical Beam Coverage: 0 to +10 degrees
Classification: The specifications of this product are according to: - Low-intensity, Type A (fixed obstacle) (ICAO) - Low intensity obstacle (group A) (CAA)

Order code Q80RI03-Q-OBSTRUCTION LIGHT LOW INTENSITY 10CD

11 Input power: 100-240 VAC
12 Input power: 24 VDC

Conductor Sphere

Certificates

Technical details

Datasheet, Manuals and Drawings

Details

The Aviation Obstruction Marking Sphere offers visual warnings for pilots near electricity transmission lines, especially high voltage lines spanning rivers. Made of high-grade Fiberglass Reinforced Plastics (FRP), it has 600mm diameter. The sphere, typically in aviation orange, white, or red, is placed on the highest line. When multiple lines exist at the highest level, alternating white and red or white and orange spheres enhance visibility.

TECHNICAL DETAILS

Standard FAA, ICAO Standard
Color Orange, Red, White, Orange/White, Red/White
Sphere body polycarbonate
Cable clamp Aluminum
alloyBolts/nuts/washers Stainless steel 304
Diameter 600mm
Weight <7.0KG
Drain holes Yes
Optional Preformed Armor Rods Reflective
StripVisible Distance 1200 meters
Voltage Range 35KV-1000KV
Wind load 240km/h
Conductor diameter 10-34 mm
Operating temperature -40C-55C

ORDER CODE

Q89CU03 – Conductor Sphere

Conductor Marker

Certificates

Technical details

Datasheet, Manuals and Drawings

Details

Conductor marking lights serve as a specialized category of aircraft warning lights specifically crafted for overhead power lines. In contrast to overhead wire markers that rely on daylight, conductor marking lights are designed to be visible during nighttime. These lights enhance the visibility of transmission line catenary wires in the vicinity of airports, heliports, and locations spanning across rivers. The lamps effectively mark and illuminate both the support structures (towers) of overhead power lines and the high voltage transmission line catenary wires. Utilizing multi-LED technology, this assembly light is dedicated to beaconing high voltage lines and boasts an extended lifespan of 100,000 hours. Characterized by a compact design and lightweight construction, this system facilitates the quickest and easiest installation available in the market.

TECHNICAL DETAILS

ICAO ANNEX 14, Volume I, Chap. 6 TYPE B Low intensity obstacle light
FAA AC 150/5345-43
FAA Type L-810 Low intensity obstacle light
Luminous Source LEDS
Luminous Intensity
Type of Obstruction Light Low Intensity,Type B
Color Red
Horizontal Beam 360°
Vertical Beam 10°
15A Conductor Current <50A 10cd
Conductor Current >50A 32cd
Lifespan 100,000 hours
Body Material Aluminum alloy + Rubber
Lens Material Polycarbonate
Mounting Bolts and Nuts (SS)
Dimensions 252x215x178 mm
Humidity 95%
Wind Speed 240Km/h
Voltage Lines 1V to 500kV
Compatible Conductor Diameter: 15mm to 40mm
Functioning Temperature -55°C to + 65°C
HV Current 15A-2000A
Operating Line Frequency 50Hz/60Hz
Photocell Activation 50Lux
Power Consumption < 5W
Net Weight 4.1kg

ORDER CODE

Q89CU04 – Conductor Marker

Explosion proof obstruction Light Low In

• Atex Zone 1 and 2 / Class 1 Hazardous Area

Certificates

Technical details

Datasheet, Manuals and Drawings

Details

The Q-Explosion Proof Obstruction Light Low Intensity 10 cd is a ICAO & CAP437 & CAP168 compliance 10 cd Obstruction Light for hazardous areas up to zone 1 for. The Q-Explosion Proof Obstruction Light Low Intensity 10 cd is available in several configurations such as 100-240 VAC and 24 VDC.

Omnidirectional low intensity steady red obstruction lights conforming to the specifications for low intensity obstacle lights having a minimum intensity of 10 candelas for angles of elevation between 0 degrees and 10 degrees should be fitted at suitable locations to provide the helicopter pilot with visual information on the proximity and height of objects which are higher than the landing area and which are close to it or to the LOS boundary. This should apply, in particular, to all crane booms on the installation.

Order code Q80RI01 – Ex Obstruction Light 10 cd

Q80RI01–11R1 Input power: 100-240 VAC
Q80RI01–12R1 Input power: 24 VDC

Q80RI01–ALR1 Aluminium, Powder coated Housing
Q80RI01–SSR1 SS316, Powder coated Housing