Q-Beacon light controller
Certificates
Technical details
Datasheet, Manuals and Drawings
Details
The controller has been programmed to make the beacon light dimmable in two positions: 3%, 10% or 100%. This avoid dazzling the pilot during the final stages of the approach and landing. Where a heliport beacon is likely to dazzle pilots at short range, it may be switched off during the final stages of the approach and landing, by operating the controller.
Order code
Q13RI03C-R1Additional Information
| Article Number: | Q13RI03C |
| Manufacturer: | Q-Aviation B.V. |
| HS-Code: | 94054039 |
| Warranty: | 2 Years |
Product Specifications
| Application: | Q-Beacon Light |
| Suitable For: | Safe Area |
| Zone: | Safe Area |
| Flash rate: | Morse "H" |
| Enclosure: | Steel, Powder coated RAL7035 |
| Mounting: | Wall mount, 4x M8 |
| Input Voltage: | 100-240 VAC 50-60Hz |
| Cable: | H07RN-F 3x2,5mm² |
| Tested Ambient Temp: | -20°C to + 50°C |
| Incompliance with: | ICAO annex 14, CAP437 |
| Cable glands included: | 12 x M25x1.5 |
| Cable outer dimension : | 12 - 19mm |
| Consumption: | 5 Watt |
| Life expectancy: | 100.000+ hours |
| Cable bottom entry: | 12 x M25x1.5 |
| Ingress Protection: | IP54 |
| Intensity modes: | 3%, 10% and 100% |
| Fault detection: | Yes, Potential free relay |
| Flash sequence: | Morse H, ICAO compliance |
| Cable glands: | 12 x M25x1.5 |
| Cable size: | 12 - 19mm |
| Output: | 1 x Q-Beacon Light |
| Ambient temp: | -20°C to + 50°C |
Size and Dimension
| Weight: | 11.9 Kg |
| Dimension: | 300 x 400 x 210 mm |
| Dimension Packaging: | 430x310x300mm (LxWxH) |
