Status Light System
- ICAO annex 14, CAP437
Certificates
Technical details
Datasheet, Manuals and Drawings
Details Q-Status Light System
The Q-Status Light System is the 700 cd, 120 flashes per minute status light system that can indicate when a helicopter is prohibited to land on your helideck. The status light system is easy to maintain and offers various features such as a gas sensor input and different intensities that can be controlled remotely. The complete assembly consists of one lighting unit and one system controller. Repeater lights can be purchased optionally.
A visual warning system should be installed if a condition can exist on an installation which may be hazardous for the helicopter or its occupants. The system (status lights) should be a flashing red light (or lights), visible to the pilot from any direction of approach and on any landing heading. The aeronautical meaning of a flashing red light is either “do not land, aerodrome not available for landing” or “move clear of landing area”. The system should be automatically initiated at the appropriate hazard level (e.g. impending gas release) as well as being capable of manual activation by the HLO (Helicopter Landing Officer). It should be visible at a range in excess of the distance at which the helicopter may be endangered or may be commencing a visual approach.
A) This product must be connected to the Q14RI03C - Status light controller. This controller is a separate product.
B) When a complete helideck package is offered, the status light controller can be built in the Q-Control WMX series
Related Systems
Additional Information
Product Specifications Q-Status Light System
Size and Dimension
| Article Number: | Q14RI03-system |
| Manufacturer: | Q-Aviation B.V. |
| HS-Code: | 94054039 |
| Warranty: | 2 Years |
| Application: | Helideck |
| Hazardous area: | Safe Area |
| Light Color: | Red, 630nm |
| Light Source: | LED, flashing |
| Light Intensity: | 826 cd |
| Flashes per minute: | 120 FPM (From Controller) |
| Enclosure: | Aluminium, Powder coated RAL5015 / Borosilicate glass |
| Mounting: | Rigid, 4x M8 |
| Input Voltage: | From controller |
| Tested Ambient Temp: | -25°C to + 60°C |
| Cable side entries: | 1 x M25x1.5 |
| Cable bottom entry: | 2 x M25x1.5 |
| Cable size: | 12 - 19mm |
| Cable stops included : | 2 x M25x1.5 |
| Cable: | H07RN-F 3x2,5mm² |
| Earth Connection: | up to 4mm2 / AWG 12 |
| Ingress Protection: | IP67 |
| In Compliance With: | ICAO annex 14, CAP437 |
| Cable glands included: | 1 x M25x1.5 |
| Cable stops included : | 2 x M25x1.5 |
| Weight: | 11.9 Kg |
| Dimension: | 210x300x400mm (LxWxH) |
| Dimension Packaging: | 430x310x300mm (LxWxH) |
