Q Aviation

Waldammeweg 7D 4338 PM

Middelburg, The Netherlands

+31 118 236 100

Contact

Contact Asian office:

Wechat:pengzhongchen002

+86 18665853497

Q-Status Light System

The Q-Status Light System is the 826 cd, 120 flashes per minute status light system that can indicate when a helicopter is prohibited to land on your helideck. The status light system is easy to maintain and offers various features such as a gas sensor input and different intensities that can be controlled remotely.

Safe Area

Q-Status Light System

  • Q14RI03-R1 CAP437, (Excluding Controller)

Certificates

CAP437

Technical details

IP67 CE ROHS

Datasheet, Manuals and Drawings

manual DWG

Details

The Q-Status Light System is the 826 cd, 120 flashes per minute status light system that can indicate when a helicopter is prohibited to land on your helideck. The status light system is easy to maintain and offers various features such as a gas sensor input and different intensities that can be controlled remotely. The complete assembly consists of one lighting unit and one system controller. Repeater lights can be purchased optionally.

A visual warning system should be installed if a condition can exist on an installation which may be hazardous for the helicopter or its occupants. The system (status lights) should be a flashing red light (or lights), visible to the pilot from any direction of approach and on any landing heading. The aeronautical meaning of a flashing red light is either “do not land, aerodrome not available for landing” or “move clear of landing area”. The system should be automatically initiated at the appropriate hazard level (e.g. impending gas release) as well as being capable of manual activation by the HLO (Helicopter Landing Officer). It should be visible at a range in excess of the distance at which the helicopter may be endangered or may be commencing a visual approach.

A) This product must be connected to the Q14RI03C - Status light controller. This controller is a separate product.
B) When a complete helideck package is offered, the status light controller can be built in the Q-Control WMX series

Order code status light

Q14RI03-R1

Additional Information

Article Number: Q14RI03
Manufacturer: Q-Aviation B.V.
HS-Code: 94054039
Warranty: 2 Years

Product Specifications

Application: Helideck
Zone: Safe Area
Light Color: Red, 630 nm
Light Source: LED, flashing
Light Intensity: 826 cd
Flashes per minute: 120 FPM (Via Controller)
Enclosure: Aluminium, Powder coated RAL5015 / Borosilicate glass
Mounting: Rigid, 4x M8
Input Voltage: From Controller
External earthing: up to 4mm2 / AWG 12
Tested Ambient Temp: -25°C to + 60°C
Cable side entries:2 x M25x1.5
Cable bottom entry: 1 x M25x1.5
Cable size: 12 - 19mm
Cable stops included : 2 x M25x1.5
Consumption: 10 Watt
Life expectancy: 100.000+ hours
Cable: H07RN-F 3x2,5mm²
Suitable For: Safe Area
Earth Connection: up to 4mm2 / AWG 12
Ingress Protection: IP67
In Compliance With: ICAO annex 14, CAP437
Hazardous area: Safe Area
Class: Safe Area
Cable glands included: 1 x M25x1.5
Cable stops included : 2 x M25x1.5
Ip index: IP67

Size and Dimension

Weight: 4.2 Kg
Dimension: 183x183x150mm (LxWxH)
Dimension Packaging: 200x200x200mm (LxWxH)

Hazardous Area

Q-Explosion Proof Status Light

  • Q14RI01-R1 CAP437, Ex d IIB T5, 24VDC, (Excluding Controller)

Certificates

CAP437 CAP168 ICAO ATEX IECEX

Technical details

IP67 CE ROHS

Datasheet, Manuals and Drawings

manual DWG

Details

The Q-Explosion Proof Status Light is a CAP437 compliance 826 cd 120FPM flashing light for all offshore facilities. Both Status lights must be connected to the Status light controller.

A visual warning system should be installed if a condition can exist on an installation which may be hazardous for the helicopter or its occupants. The system (Q-Explosion Proof status lights) should be a flashing red light (or lights), visible to the pilot from any direction of approach and on any landing heading. The aeronautical meaning of a flashing red light is either “do not land, aerodrome not available for landing” or “move clear of landing area”. The system should be automatically initiated at the appropriate hazard level (e.g. impending gas release) as well as being capable of manual activation by the HLO (Helicopter Landing Officer). It should be visible at a range in excess of the distance at which the helicopter may be endangered or may be commencing a visual approach.

A) This product must be connected to the Q14RI03C - Status light controller. This controller is a separate product.
B) When a complete helideck package is offered, the status light controller can be built in the Q-Control WMX series

Order code status light

Q14RI01-R1

Additional Information

Article Number: Q14RI01
Manufacturer: Q-Aviation B.V.
HS-Code: 94054039
Warranty: 2 Years

Product Specifications

Application: Helideck
Zone: Zone 1 or 2
Light Color: Red, 630nm
Light Source: LED, flashing
Light Intensity: 826 cd
Flashes per minute: 120 FPM (From Controller)
Enclosure: Aluminium, Powder coated RAL5015 / Borosilicate glass
Mounting: Rigid, 4x M8
Input Voltage: From controller
External earthing: up to 4mm2 / AWG 12
Tested Ambient Temp: -25°C to + 60°C
Cable side entries:2 x M25x1.5
Cable bottom entry: 1 x M25x1.5
Cable size: 12 - 19mm
Cable stops included : 1 x M25x1.5
Consumption: 15 Watt
Life expectancy: 100.000+ hours
Cable: H07RN-F 3x2,5mm²
Suitable For: Hazardous Area
Earth Connection: up to 4mm2 / AWG 12
Ingress Protection: IP67
In Compliance With: ICAO annex 14, CAP437
Flash sequence: 2 Hz
Hazardous area: IECEx/Atex Zone 1 and 2
Class: Zone 1 Hazardous Area
Cable glands included: 2 x M25x1.5
Cable stops included : 1 x M25x1.5
Ip index: IP67
IECEx Certificate no.: IECEx ITS 18.0052X

Size and Dimension

Weight: 4.2 Kg
Dimension: 183x183x150mm (LxWxH)
Dimension Packaging: 200x200x200mm (LxWxH)

Additional Information

Manufacturer: Q-Aviation Q-Aviation
Article Number: Q14RI03Q14RI01
HS-Code: 9405403994054039
Warranty: 2 Years2 Years

Product Specifications

Application: HelideckHelideck
Zone: Safe AreaZone 1 or 2
Light Color: Red, 630 nmRed, 630nm
Light Source: LED, flashingLED, flashing
Light Intensity: 826 cd 826 cd
Flashes per minute: 120 FPM (Via Controller)120 FPM (From Controller)
Enclosure: Aluminium, Powder coated RAL5015 / Borosilicate glassAluminium, Powder coated RAL5015 / Borosilicate glass
Mounting: Rigid, 4x M8Rigid, 4x M8
Input Voltage: From ControllerFrom controller
Cable: H07RN-F 3x2,5mm²H07RN-F 3x2,5mm²
Suitable for: Safe AreaHazardous Area
Earth Connection: up to 4mm2 / AWG 12up to 4mm2 / AWG 12
Ingress Protection: IP67 IP67
Tested Ambient Temp: -25°C to + 60°C-25°C to + 60°C
Input Power: 100-240 VAC or 24 VDC100-240 VAC or 24 VDC
Incompliance with: ICAO annex 14, CAP437ICAO annex 14, CAP437
Hazardous area: Safe AreaIECEx/Atex Zone 1 and 2
Class: Safe AreaZone 1 Hazardous Area
Ip index: IP67IP67
Cable side entries : 2 x M25x1.5 2 x M25x1.5
Cable bottom entry : 1 x M25x1.5 1 x M25x1.5
Cable glands included: 1 x M25x1.5 2 x M25x1.5
Cable stops included : 2 x M25x1.5 1 x M25x1.5
Consumption: 10 Watt 15 Watt
Cable size: 12 - 19mm12 - 19mm
Life expectancy: 100.000+ hours100.000+ hours
External earthing : up to 4mm2 / AWG 12 up to 4mm2 / AWG 12

Size and Dimension

Manufacturer: Q-Aviation Q-Aviation
Weight: 4.2 Kg4.2 Kg
Dimension: 183x183x150mm (LxWxH)183x183x150mm (LxWxH)
Dimensionpackaging: 200x200x200mm (LxWxH) 200x200x200mm (LxWxH)
Related Products

Our Products

Q Aviation has built a worldwide reputation for designing and producing reliable products compliance for Offshore & Onshore lighting industry. Q Aviation has analyzed the specific needs of the offshore oil and gas industry and tailored its products accordingly. These products must be safe and function properly. All our products are made of the highest possible material and compliance to all aviation regulations. The Helipad and Helideck products are compliance to ICAO and FAA.

At Q Aviation we understand the customer's requirements and tailor our products accordingly.

Thanks to good mutual cooperation with the customer, our leading self-produced products regarding navigation and helideck lights are completely tailored to the needs of the customer, anywhere in the world.

Questions about our product Q-Status Light System?

To provide you with the correct information about our product Q-Status Light System, we would like to ask you to contact us via the appropriate contact form or call us

+31 118 236 100

Get a quote