
Explosion Proof Status Light
- ICAO annex 14, CAP437
Safe area Atex / Zone 1
Certificates





Technical details



Datasheet, Manuals and Drawings




Details Q-Explosion Proof Status Light
The Q-Explosion Proof Status Light is a CAP437 compliance 826 cd 120FPM flashing light for all offshore facilities. Both Status lights must be connected to the Status light controller.
A visual warning system should be installed if a condition can exist on an installation which may be hazardous for the helicopter or its occupants. The system (Q-Explosion Proof status lights) should be a flashing red light (or lights), visible to the pilot from any direction of approach and on any landing heading. The aeronautical meaning of a flashing red light is either “do not land, aerodrome not available for landing” or “move clear of landing area”. The system should be automatically initiated at the appropriate hazard level (e.g. impending gas release) as well as being capable of manual activation by the HLO (Helicopter Landing Officer). It should be visible at a range in excess of the distance at which the helicopter may be endangered or may be commencing a visual approach.
A) This product must be connected to the Q14RI03C - Status light controller. This controller is a separate product.
B) When a complete helideck package is offered, the status light controller can be built in the Q-Control WMX series
Order code status light
Q14RI01-R1Additional Information
Article Number: | Q14RI01 |
Manufacturer: | Q-Aviation B.V. |
HS-Code: | 94054039 |
Warranty: | 2 Years |
Product Specifications Q-Explosion Proof Status Light
Application: | Helideck |
Zone: | Zone 1 or 2 |
Light Color: | Red, 630nm |
Light Source: | LED, flashing |
Light Intensity: | 826 cd |
Flashes per minute: | 120 FPM (From Controller) |
Enclosure: | Aluminium, Powder coated RAL5015 / Borosilicate glass |
Mounting: | Rigid, 4x M8 |
Input Voltage: | From controller |
External earthing: | up to 4mm2 / AWG 12 |
Tested Ambient Temp: | -25°C to + 60°C |
Cable side entries: | 2 x M25x1.5 |
Cable bottom entry: | 1 x M25x1.5 |
Cable size: | 12 - 19mm |
Cable stops included : | 1 x M25x1.5 |
Consumption: | 15 Watt |
Life expectancy: | 100.000+ hours |
Cable: | H07RN-F 3x2,5mm² |
Suitable For: | Hazardous Area |
Earth Connection: | up to 4mm2 / AWG 12 |
Ingress Protection: | IP67 |
In Compliance With: | ICAO annex 14, CAP437 |
Flash sequence: | 2 Hz |
Hazardous area: | IECEx/Atex Zone 1 and 2 |
Class: | Zone 1 Hazardous Area |
Cable glands included: | 2 x M25x1.5 |
Cable stops included : | 1 x M25x1.5 |
Ip index: | IP67 |
IECEx Certificate no.: | IECEx ITS 18.0052X |
Size and Dimension
Weight: | 4.2 Kg |
Dimension: | 183x183x150mm (LxWxH) |
Dimension Packaging: | 200x200x200mm (LxWxH) |